Menu

Roofing Made Easy


Metal Roofing Installations To Minimize Leak Issues

If you have recently discovered that your roof is leaking, then it may be time for a new one. And, you have quite a few choices when it comes to roofing. A metal roof is a good option and you can ask your roofing contractor for a few different things to make sure that your metal roof is resistant to leaks in the future. Keep reading to learn about them.

Closed Or Standing Seams

Metal roofs can be constructed in a few different ways. And, many installations have exposed seams where the fasteners are open to the environment. These seams have dozens of fasteners along each seam. Each screw fastener is secured with a rubber gasket. However, these gaskets can fail as they age and allow water to seep underneath them, causing leaks. 

So, you want to opt for a closed seam or standing seam roof. These types of seams may be constructed through a locking system where the sections of steel are snapped together. Seams may also be mechanically bent together or they may be overlapped over one another. All of these options create a leak-proof seam. However, you should know that roofing sections may not be easily replaced if damage occurs. If this is a concern of yours, then ask about the overlapping flange type of roof. The overlapping section can be pulled up with minimal damage.

Sealed Valleys And Ridge Caps

There are a few sections of the roof that need to be sealed off properly to prevent leaks. These include the roof valleys, the ridges, and the gables. There are metal roofing pieces that are made specifically to seal off these areas, so make sure you are paying the extra cost to have them installed. The valley piece is an angled steel section that is made without seams to sit directly in the lowest part of the valley. This helps to channel water away without any moisture seeping underneath.

The ridge cap is also a solid piece that extends eight to ten inches on either side of the upper roof ridge. And, it sits on top of the other pieces of steel to keep water away. The gable pieces are like cap ends that wrap around the edge of the roof to make sure that water is drained away even if it does not make it into the gutter channels.

A roofing contractor, like those at Southern Roofing and Waterproofing and other locations, who specializes in metal roofing materials can provide you with more information about leaks and how they can be avoided. 

About Me

Roofing Made Easy

Roofing concerns can be very intimidating, especially since they could allow water to enter your home. Additionally, roofing issues could lower your home value, making it difficult to sell your place if you ever need to list it. For these reasons, it is essential to think carefully about working with roofing contractors to fix things, since they make roofing a lot easier. Check out these interesting posts for great tips and tricks about roofing, including where to turn for the kinds of services you need. After all, by taking things seriously, you can ward off issues for the long run. Check out these posts for more information.

Latest Posts

Metal Roofing Installations To Minimize Leak Issues
24 April 2020

If you have recently discovered that your roof is

How Sheet Metal Cladding Can Enhance Your Business's Exterior
17 April 2020

Having a commercial space that you're really proud